Tools To Be Needed For Alloy Wheel Correction Kit

Alloy wheels correction kits consist of fillers or silvery paint, along with tools just like sandpaper and brushes. These kits are helpful in repairing delicate and medium damage wheels that could include narrow scratches and rubs that are present at the edges of the wheel. Actually, these kits are not suitable for repairing big damages or deep scrapes.

How the alloy wheels correction kits work

These Alloy Wheel Correction kits are used to fill in the damage for creating a plain surface, otherwise, you have to repaint the damaged area. The kits contain following material:

• Stuffing or primer
• Lacquer or varnish
• Protective gloves
• Application tools, wipes, sponges, and brushes
• Paint, spray machine or brushes
• Sandpaper or polish

How to use alloy wheels correction kits

Here in this article, we are describing step by step guide for using diamond cut alloys manchester kits. If you are experienced in repairing the wheels then you must follow the proper procedure otherwise you can hire the wheel specialist.

1. First of all, you have to remove the tire from the vehicle after that deflate the wheels and remove the rubber from the tire so that all the scratches get prominent and clear.
2. After that you have to clean the tires, for cleaning it you can wash it by using soap water or wheel cleaner. Always keep in mind you have to clean all the dust, dirt or grime that is present on the surface of the rim. For this, you can use the brushes so that you could get the perfect finishing.
3. After that now you have to sand the rims so that all the all the damages and scratches could get filled up.
4. Always prefer to select the finer sandpaper and apply sand over the scratched area again and again to get the smooth finish. And don’t forget to wipe away the dust present on the surface of the rim by using a damp cloth or even with an alcoholic wipe and then let it dry.
5. After filling let the filler set and get dried completely. Always keep in mind that this filling will get dry faster only when you place it in the oven. So you have to avoid placing it in cool or warm places.
6. After applying filler now you have to apply primer on the surface of the rim. And then leave it for a while so that it could get dried.
7. When primer will get dry then you have to apply the paint to it, always remember you have to apply the paint in different coats. So that you could get the perfect finishing.
8. After applying the paint in various coats now you should leave it to get dry.
9. And at the end of the process, you can apply the lacquer so that you could get the perfect and shiny finishing.
10. This lacquer will also help you to the paint, and protect it from getting damage just like flaking. You have to apply lacquer in a dainty mist for avoiding running after that allow it to get dry and then apply another coat on it.